Note: This is Global Version, with original EU standard Plug. Mi Wi-Fi Range Extender Product Model R03 Dimensions: 80 x 54 x 70 mm CPU: MT7628K 580 MHz ROM 2 MB RAM 8 MB Antenna Type: 2 external antennas Wireless Standards IEEE 802.11b/g/n Signal Rate 2.4 GHz, up to 300 Mbps Wireless Security WPA-PSK/ WPA2-PSK encryption Power Supply 100-240 V/0.35 A Operating environment Operating temperature 0-40°C Operating humidity 10%-90%RH (non-condensing) Storage temperature -40-70°C Storage humidity 5%-90%RH (non-condensing) Power consumption 3.57W Package contents Mi Wi-Fi Range Extender Pro user manual Easy Wi-Fi extension Tired of Wi-Fi “dead zone”? Mi Wi-Fi Range Extender Pro can help you easily connect to the network. 1、Put the extender near the router, turn the power on and wait for the yellow indicator light to start flashing. 2、Scan the QR code to install the app and follow the instructions to add the device. 3、When the indicator light turns blue, pairing is complete. Now you can simply unplug and plug the Mi Wi-Fi Range Extender Pro in a location for the best signal quality and coverage in your house, without needing to configure the extender again FAQ Q1:What do the different colors of the indicator light mean? A: 1)The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful. 2)The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds. 3)Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network. 4)Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service. Q2:Why The amplifier is always flashing orange, then the blue light is flashing? A:The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed. Please upgrade your router to the latest development or stable version (2.0 or above) Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair The paired amplifier appears blue flashing Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing Q3:How to customize the network name and password of the amplifier? A:Not supported yet, Q4:How to upgrade the firmware? A:When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade; In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client. Q5:Why can't the amplifier get the signal from the router? A:Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .

Condition: New

Brand: Xiaomi

EAN: 0730881651717

MPN: iiixtenderroblack