Main Features: 1. Plug & Play: installed via original CD changer port, easy and fast, perfectly integrated with the car. 2. Wireless A2DP Playback: easily streaming music of Bluetooth devices into a factory car stereo system. 3. Hi-fi Sound Quality: Connected to car stereo via wire harness, no interference and no loss of sound quality, rivaling original CD sound. 4. Allow you to easily have a popular configuration of advanced car stereo, is the best choice for safe driving and enjoying digital music. Specification: Voltage Input : 4.5V ~14.6V DC Operational Current : 600mA Standby Current: 20mA Operating Temperature: -35℃~+75℃ DAC Resolution : 20bit Total Harmonic Distortion: 0.05% SN Ratio : 90dB Frequency Response: 20HZ-20KHZ Package includes: 1x Universal Car Bluetooth 5.0 AUX Audio Cable Note: 1. Doesn't support hands-free phone call(HFP): It doesn't supports answer/hang up etc. Via car radio buttons and steering wheel buttons. 2. Doesn't support Bluetooth AVRCP Control: Prev/Next Track, Pause/Play, Fast forward/backward via car radio buttons or steering wheel buttons. Installation Guide: Installation Preparation： 1. This product operates on a vehicle with 12 volts or 5-volt DC negative ground system. Do not use it on another voltage system. 2. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios. 3. Make sure the car stereo is powered off before installation. Otherwise, the car stereo may be damaged. It is suggested to install it in a car dealer shop or professional car stereo store. 4. Usually, the car stereo needs to be removed so as to plug the Bluetooth kit main connector into the CD changer port on the radio pack. For some car models, Bluetooth kits can be installed in the glove box or trunk where the external CD changer port is located. 5. Please read the car stereo wiring diagram carefully before installation (normally on the top side of the car stereo）. Check and confirm where are the following ports on the back of the stereo: CD changer port, B+/Ub+/12V ACC port(different car stereos have different names. such as BAT, Bup+, B-U, MEM +12, KL.30), and GND port. Installation Steps： 1. Turn off the car engine and remove the key from the ignition, if the car radio uses a security code, make sure that you have the code before unplugging the radio. 2. Unmount the radio from the dash in order to get access to the back side of the radio, and find the CD Changer port at the back of the radio. For details on unmounting, please refer to the car user manual or car stereo manual, or ask professional staff to unmount the radio. 3. Connect the wire harness to the car stereo radio module unit in advance. Be sure to make a firm connection. Then attach the wire harness connector to the back of the stereo to the CD changer port. 4. For some car models, connect the red wire to the B+/Ub+/12V...

Condition: New

Brand: YJMP

MPN: 000420