Trend Lock Jig LOCK/JIG Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. Features: For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Specifications Door thickness min.: 34 mm Door thickness max.: 58 mm Template outer size: 234.3 x 59.8 x1.5mm Lock faceplate sizes Metric D x OL (Imperial D x OL approx.).: Template 2x156 mm (7/8x 6 1/8): 1 5x152.5 mm (7/8x 6): 2 4x121 mm (1x 4

Condition: New

Brand: Trend

EAN: 5027654521731

MPN: lockjig